timing belt change: October 2011

Tuesday, October 25, 2011

I have a 2002 nissan frontier pick up.How hard is it to change the timing belt.Do i need the belt or the kit?

Is there a free instruction manual out there to help with this? I dont want to take it to a dealer and pay too much.I have a 2002 nissan frontier pick up.How hard is it to change the timing belt.Do i need the belt or the kit?This is more work than usual. You need the belt kit and also some correct tools.

I'd rather you send to the shop if you are not familiar with the timing points.

To remove the belt, you have to remove the obstructing components around the engine first b4 you can reach the timing belt casing.

Conclusion:

Send it to a reliable shopI have a 2002 nissan frontier pick up.How hard is it to change the timing belt.Do i need the belt or the kit?kit, if you haven't done one and don't know what a free wheeling engine is bring it to a shop

how to break up with a boyfriend

hair cut styles

Instructions to change timing belt in voltswagen golf?

Please, if you have to ask this question, don't do it alone. Do you know anybody that is skilled in this field? If not, go to a shop.Instructions to change timing belt in voltswagen golf?see if you can find a Hayes or Chilton Manuel on your car at local library or parts store that will give you a better detail explanation and illustrations on what you need to knowInstructions to change timing belt in voltswagen golf?What year? What engine?Instructions to change timing belt in voltswagen golf?it would take an hour or 2 to write all of this out. if you don't know how to do it, then chances are you shouldn't attempt it in the 1st place. go get a mitchell or chilton's manual, read it over and over, and if you think you still want to tackle it, then start in. a mistake in just the wrong place will cost you an engine. just remember.

When should I change the timing belt in my 04 dodge sx 2.0?

My car just hit 100k, and I'm wondering when I should be changing the timing belt. Should I be getting the water pump changed as well?When should I change the timing belt in my 04 dodge sx 2.0?100K sounds like its about time to change your timing belt. It's best to buy an owner's manual for any car you own, it also tells you what other maintenance needs to be done and when you need to do it. With most vehicles, the timing belt is behind the water pump and needs to be replaced as well, typically you would have the water pump and timing belt changed at the same time.When should I change the timing belt in my 04 dodge sx 2.0?yes to both 80,000 is a good time, radiator reverse flushed as well,

How do i change the timing belt on a 1984 toyota tercel wagon?

Having trouble accessing the bottom bolt. I can't get it removed...How do i change the timing belt on a 1984 toyota tercel wagon?You will need a Impact or a chain wrench to hold the pulley from turning. Then get a big breaker bar and pull hard.

They can rust in and be very hard to get out.How do i change the timing belt on a 1984 toyota tercel wagon?that's one of the the tightest bolt on your entire car. good luck.

When should i change the timing belt on my 03 Dodge Neon Srt?

It has 113,00 miles on it.When should i change the timing belt on my 03 Dodge Neon Srt?You should have changed it already.When should i change the timing belt on my 03 Dodge Neon Srt?their supposed to be changed every 75 thousand miles if you try and go past that sometimes they will break and cause engine damage to it,if your unsure of when it was changed id go ahead and change it now,it will save you a lot of headaches on down the line with it,good luck.When should i change the timing belt on my 03 Dodge Neon Srt?At a 113K miles, it should already have been done.

While you're changing the timing belt, replace the water pump, tensioner body, tensioner pulley and, since you're there, swap the idler pulley at the same time.When should i change the timing belt on my 03 Dodge Neon Srt?yeah man way past due!! when you change it use a Mitsuboshi belt and yes thats Mitsuboshi! they are the best belt around!!When should i change the timing belt on my 03 Dodge Neon Srt?i recommend taking it to someone who works on this type of cars, reason been, a lot of shops will turn you down, especially if is modded, also try getting a after market one, try modern performance, as a former srt owner i can tell you is worth the money, but like they said before change the water pump and the tensioner also, it would be a shame for it to go bad and you have to pay again. It should run you about about $ 400 $500 give it or take, but if you got the tools the time and the patience's i recommend do it your self is not hard at all, just time consuming.

Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?

My mechanic wants to charge me $600 for it. If I have to do it, are there less expensive alternatives? Dealer of course wants $1,600. Not going to work. Thanks.Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?you should have it changed now while its okay compared to when the belt snaps and youll have to rebuild the whole thing for a steep price....and the cheaper alternative is to do it yourself...timing belt for $30 and waterpump for $70 and some silicon gasket maker for $7 plus another $5 for the coolant...and a whole day of working on the car...so the mechanics price is pretty reasonable...Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?the only reason they want to change it is because so many have wore out at around 100,000 miles and if you were to change it ahead of time you would be ahead of the game... waiting for it to break or get weak and slip would be a pain in the butt especially if you were parking with the maid out in the woods.... The dealer charges so much because they have a book and a set scale that they have to charge, even if it does not take the alloted time.. You mechanic is just a regular guy who loves his work and would rathere keep friends then the dealer who does not give a crapDo you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?Your car will continue to work for awhile. But when the timing belt does break, it makes an awful mess of the valves and pistons, etc, and is much more expensive. Start saving the $600 up.

(This is why used cars are cheaper than new cars.)Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?Do you feel lucky?

To me $600 at a time when it is booked in and you can make arrangements for OR...$3000 and up for a new engine and sitting on the side of the road for recovery on your way to something important!

It is a no brainer, surely?Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?Change it. It is an interference engine, meaning if the belt brakes it will cause internal engine parts to hit each other, causing very expensive damage, its not worth the gambleDo you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?Simple answer - yes.

====

The belt will eventually break. And that means few thousand dollars in engine damage. And even after the repair, the engine will NEVER be the same.

Good luck...Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?these guidelines are set to keep your running at its potential, if you ignore these then its down to you, i personally wouldnt ignore itDo you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?Failure to change it could cause major engine damage if it breaks. $600.00 is reasonable.Do you really need to change the timing belt on an Acura 2001 at the 105,000 miles as suggested?ask yourself if the $600 spent on maintenance is worth it over $3000 for repairs.......

do at a tanning salon

identifying rows

When do i need to change the timing belt on a 1995 mistsubishi magna?

It is a manual, TE Exectutive, wagon.When do i need to change the timing belt on a 1995 mistsubishi magna?when it breaks...don't startWhen do i need to change the timing belt on a 1995 mistsubishi magna?Usually around the 100,000Km mark. However some model cars need to have it changed sooner. Don't delay changing it, because the cost of a new motor is much more than the cost of changing a belt.When do i need to change the timing belt on a 1995 mistsubishi magna?I HAVE A 96 MAGNA TE EXEC WAGON AND I HAD IT DONE A WHILE BACK AND WAS TOLD BY THE MECHANIC THAT IN THEORY IT SHOULD BE CHANGED EVERY 100.000 KM BUT SOME TIMES WITH THE AUTO TENSION THEY WILL LAST UP TO 175.000 KM HOPE THIS HELPS IF UNSURE SEEK ADVISE FROM YOUR MECHANICWhen do i need to change the timing belt on a 1995 mistsubishi magna?A timing belt is just one of those things that you don't ever bother worrying about until it breaks. Your serpentine belt on the other hand should be replaced at the first sign you start to see cracks in it. Because your vehicle will continue to run with a broken serpentine belt and eventually burn up your engine. When a timing belt breaks your engine will die automatically. I really wouldn't worry about it. I just wish they would use timing chains in all vehicles the way they used to back in the day because they seem to last a hell of alot longer than belts. But you know what they say you can wish in one hand and sh*t in the other and see which one fills up faster. LOL. Hope this advice helped you out.When do i need to change the timing belt on a 1995 mistsubishi magna?I have a 1998 Mitsubishi Lancer, it only has 90,000 kms on it. Has been a GREAT car! anyway.... my dad is a mechanic, he suggests about 100,000 kms. Good Luck

At what mileage should I change the timing belt on my 2000 Civic LX?

I've lost my owner's manual!!! Pleas help!At what mileage should I change the timing belt on my 2000 Civic LX?According to the Gates timing belt replacement guide (link below), 105,000 miles and you have an interference engine with a timing belt driven water pump that should be changed at the same time along with the belt tensioner pulley. Total cost about $700At what mileage should I change the timing belt on my 2000 Civic LX?i think the manual says 100 to 150 k

Other than timing belt and water pump what else is recommended to change with a Timing Belt change?

I have 2002 Toyota Avalaon XLS with about 112k and I need to do the Timing Belt change,..I'm just trying to see if I'll fare better buying my own parts or trusting my Mechanic...he quoted me $550-600 for doing everything, including changing out the water pump as well.

Any advice??---I'm currently unemployed....yet I need a thorough job done...just can't afford to give money away.

PS,.. a friend of mine says he has Avalon and Lexus with over 200k....and never once changed the Timing Belt.....he says its all just a big money making Scam and major Rip-off....he says he even knocked meat from his mechanics mouth for even suggesting it!!,...ya gotta know this guy...extremely burly and about 6'10 and over 450 lbs..lol

thanksOther than timing belt and water pump what else is recommended to change with a Timing Belt change?i have 96 toy camery. i neglected to replace timing belt about 120k. i could hear my timing belt going out and finally on a trip it did and wasted whole day of my vacation at a mechanic shop. water pump will start to leak before going out. what ur mechanic is saying is preventive maintenance. if u got timing chain then drive for another 300k miles or so. when replacing timing belt always replace water pump (pay only for part not labor because it's right there), check all the seals and replace to save future expenses.

good luckOther than timing belt and water pump what else is recommended to change with a Timing Belt change?check your owner's manual. It will %26quot;suggest%26quot; certain maint. at so many miles. It is NOT mandatory though. There are good, honest mechanics out there that will be honest with you about certain procedures (like oil changes based on time, not mileage, but if you haven't put any miles on the car or the vast majority of the miles are highway miles, you can go a little farther between oil changes) and small things like spark plugs can be removed and cleaned, not necessarily replaced with new, high-dollar ones)Other than timing belt and water pump what else is recommended to change with a Timing Belt change?YOUR FRIEND CAR PROBABLY HAVE TIMING CHAIN INSTEAD OF TIMING BELT. TIMING CHAIN ON TOYOTA OR LEXUS LAST OVER 300,000 MILES EASY. I RECOMMEND MY CUSTOMERS TO CHANGE THEIR TIMING BELT AT 120,000 MILES ON TOYOTA AND LEXUS. IT ALSO INVOLVE REPLACING CAM AND CRANK SEALS IN CASE IT LEAK OIL INTO THE TIMING BELT, AND TIMING BELT TENSIONER JUST IN CASE IT LOOSES IT TENSION.Other than timing belt and water pump what else is recommended to change with a Timing Belt change?Your burley friend is an IDIOT!!! Many engines will bend valves if the timing belt breaks. In my experience, timing belts like to break on the coldest winter mornings upon start-up. I guess they are rebelling against the cold like we do. Timing belts in warmer climes tend to last a bit longer. DO YOURSELF A FAVOR!!!! NEVER use anything but genuine Toyota parts. DO NOT buy parts from the local auto parts store. Many Toyota dealerships offer exchange prices on the water pumps. USE ONLY GENUINE TOYOTA COOLANT!!!! USE ONLY GENUINE TOYOTA TIMING BELT!!! Same for water pump. After market, rebuilt pumps by non-professional rebuilders are usually just JUNK and create problems later on. Look how long your original one has lasted!!! If you are ambitious, you can do this job yourself with the help of a Haynes manual and a few hand tools. Good luck!!Other than timing belt and water pump what else is recommended to change with a Timing Belt change?If you've ever seen a belt after it's exceeded its useful life, you'd replace it.

I agree that some manufacturers probably artificially big this up as needing doing the second your car hits the age/mileage marker, but it's still an important thing to do.

On a lot of cars, it is not the belt that goes but often a tensioner - these are sometimes quite cheaply made parts and bears seize and fail in them. When the tensioner goes, your belt can jump a few teeth and that's enough to cause huge problems.

Similarly the water pump bearings do not last forever. I would say you have a month or two's leaway if you are worried, but it's a job that will need doing sooner or later for your own peace of mind if nothing else.Other than timing belt and water pump what else is recommended to change with a Timing Belt change?Seeing that your car has 112K and your unemployed it can last longer maybe 150K.

Now with that said are you willing to take the risk and the timing belt breaks causing you to spend much more money on a head job ?

Usually when changing the belt you change seals too and maybe tensioner it its bad ( crank seal , cam seals, etc)

HINT : the Timing belts usually break faster with hard driving , over revving , racing, etc . So if you dont really drive hard you shouldn't have to worry . However if you are a speed racer like me its good to do it between 70-100K miles.

For the 20 yrs Experience mechanic , most toyota's and Lexus's have TIMING BELTS NOT chains. The avalon is equipped with a TIMING BELT . Most NISSAN'S/ Infinities have timing chains.

How many km we must be change timing belt for vw passat 1600?

we have vw passat 1600 c model 1998,how many km spent before change timing beltHow many km we must be change timing belt for vw passat 1600?1.8L %26amp; 2.8L engines 105,000 miles or 168,981.4 KM

1.9L TDI engine, 120,000 miles or 193,131.6 KMHow many km we must be change timing belt for vw passat 1600?Sammy there is an Internet page that gives all the official timing belt change intervals and tells you whether its an interference or non-interference engine. I would guess 60k, but you don't want to spend your life on guesses do you?How many km we must be change timing belt for vw passat 1600?all manufactures have a limited usage per mileage posted in there maintenance manual. it works great for me

howtofalloutoflovewithsomeone

hair show

When you change the timing belt on a 2004 Chev Aveo, do the push rods have enough room so they do not bend?

According to Motor Trend, the Aveo has an overhead cam design, so I wouldn't worry about push rods, as they aren't present.When you change the timing belt on a 2004 Chev Aveo, do the push rods have enough room so they do not bend?Align cylinder 1 to TDC of the compression stroke. This way, the timing belt is aligned before you take it off. Then, don't turn anything while working on it. Make sure the cam and crank are both still aligned after you get the new belt installed.

How easy or hard is it to change the timing belt on a Citroen Synergie ?

Are there any specialist tools required . How easy or hard is it to change the timing belt on a Citroen Synergie ?you do req timing pin tools to locate and hold camshaft crankshaft and fuel pump and the crank pulley bolt is v tight u can use long 8 mm bolts to locate your timing gears i do but your flywheel locating tool should be hardened steel will push in to flywheel the rest screw inHow easy or hard is it to change the timing belt on a Citroen Synergie ?Its easy if you're skilled and have the know how and tools, but its very hard if you've not. Is it worth the risk?...

Do you recommend to change the timing belt at the dealer or local garage?

Well this is all left up to trust. Since the timing belt is such a vital part to the engine, I would trust the dealership over a local garage, because the dealership has all special tools needed and are more likely to warranty the work they do if anything went wrong with the timing later on down the road.They also use the best parts for you car, OEM parts.Do you recommend to change the timing belt at the dealer or local garage?alot of newer cars are better to do at a dealer because they have the proper tools where some local shops will try and make their own tools and not torque the timing bolt to the right foot pounds and you will be driving down the road and the timing belt will come off and the pistons will bend your valves.Do you recommend to change the timing belt at the dealer or local garage?who ever you trust more... if you have a local guy you go to all the time, go there...Do you recommend to change the timing belt at the dealer or local garage?A good garage can do the work. Usually timing belts are not a hard job. Just be sure not to take it to some dumpy looking garage off the side of back woods dirt road.Do you recommend to change the timing belt at the dealer or local garage?in my city we have afew good garages.if you have one in your city you trust i would go to it before a dealer.a good local garage will be a little cheaper.a dealer is going to be alot more on parts and around 80 bucks a hour labor.good luck.Do you recommend to change the timing belt at the dealer or local garage?wow you only have 60,000 mi on your car%26amp; you have to replace the water pump and the timing belt already. the timing can be very tricky if you dont have the right equipment ,i myself would let a local garage do it .Do you recommend to change the timing belt at the dealer or local garage?$400 isnt a bad price for that job you and if you find it much cheaper somewhere else I wouldnt take my car there anyway. Remember you get what you pay for. Id go to the dealer for that price. As far as the water pump goes the mechanic will already be that far so for the extra couple bucks just do it.Do you recommend to change the timing belt at the dealer or local garage?The water pump has to come off to get to the belt. Best to put on a new pump so you dont have to go back in there later.

How often should I change the timing belt on a Toyota Corolla?

1995, manual.How often should I change the timing belt on a Toyota Corolla?Per the Haynes Repair Manual, every 60,000 miles.How often should I change the timing belt on a Toyota Corolla?Every 75,000 miles and check tension and fray regularly.How often should I change the timing belt on a Toyota Corolla?every 60,000 miles not 75,000How often should I change the timing belt on a Toyota Corolla?every 60 k miles also ALWAYS replace any tensioners or idler rollers because there bearing are almost always shot after 60 kHow often should I change the timing belt on a Toyota Corolla?check it every 50 thousand miles, and change it if needed... but change it every 80 thousand miles the usually last long during normal driving conditions.

How much does it cost to change a timing belt on a Toyota Camry 1997 LE?

I've called numerous places and they told me it'd cost $250. That's expensive, is it? Is there a better deal? Please advise.How much does it cost to change a timing belt on a Toyota Camry 1997 LE?This site shows it cost $100-250.

http://www.faqfarm.com/Q/How_much_should

In Missouri (in the country), you might find someone that will do it for $120. According to that site, it is a 2-3 hour job. Most people in Missouri charge about $40+ an hour. I noticed that your in Boston, so on the east-side, you are going to be charged more, because everything is more expensive on the east-side. The central part is the cheapest, however, we make a lot lower wages.

Whatever you do, don't go to Pep Boys, they charge too much. They wanted $40 just to change the oil. Wal-Mart changes oil for $18.

database

possible to see spouse

Cost of timing belt and water pump change?

Have to change my timing belt and water pump on a 01 seat laon 1.9tdi got a quote of 450euro is this reasonableCost of timing belt and water pump change?i wish i could assist, but i assume this isn't an american car. i just got mine changed and it was about $525. anywhere between 300-600 is reasonable though. the dealership charged 625, which was painfully high so i dont recommend going thereCost of timing belt and water pump change?~ $500 US

Timing belt and water pump change?

I must change the timing belt of my car. I have been told that the water pump must be done too since it is right there. Due to the high price I want to postpone/skip the water pump until the next tune up. What happens if the water pump fails down the road? How long does a water pump last? 120K? My car has 60,000 miles on it. Thank you.Timing belt and water pump change?I always suggest at same time. Most timing belt jobs are 4-5 hour jobs and all of that has to be removed to replace the water pumpp, which could be in a week a month or a year (roll the dice) it doesn't usually take much if any additional labor to replace the pump when everything else is out of the way usually just the cost of the pump itself. if you wait and say a month later the water pump goes out you would have the expense of the pump AND ALL THE LABOR AGAIN.Timing belt and water pump change?The reason you are being told to change both at the same time is because the tear down is almost exactly the same to do both of those actions. It's highly recommended that you change both because you are probably gonna pay for 5 hours labour to change the timing belt then you are gonna pay for another 5 hours of labour when you take you car back to change the water pump, whereas had you simply changed the water pump at the same time it would have only added about 45 minutes of labour to the total labour...

Do both at the same time or don't bother doing any till you can afford both!Timing belt and water pump change?You don't have to renew the water pump. They mention it because it becomes easily accessible during the timing belt replacement. The extra cost should only be the cost of the water pump. So it's often sensible to include the water pump at the same time. If you do it at the next service it will cost you at least the same as you are paying now for the belt job.Timing belt and water pump change?There is no guarantee on how long the water pump will last, but normally 100,000 miles plus. But that is true of a timing belt too. The water pump has a weep hole at the bottom, visually check for corrosion or rust in that area. If you see some, could be a sign that it is ready to go soon. If not, then do the repairs that you can afford. But why the heck are you changing a timing belt at 60,000 miles.Timing belt and water pump change?not a good idea

How do I change the timing belt and an 87 chevy cavalier?

Is there a site I can go to that will give me step by step instructions or does anyone personally know how to do this? ThanksHow do I change the timing belt and an 87 chevy cavalier?Pick up a Haynes or Chilton manual for your car. Read it carefully and get everything you need before you start, and take your time, don't hurry, and you'll be fine.How do I change the timing belt and an 87 chevy cavalier?It's hardly a do-it-yourself project.How do I change the timing belt and an 87 chevy cavalier?YOU don't. A timing belt has to be set just right. You HAVE to take it to a shop!How do I change the timing belt and an 87 chevy cavalier?It does not have a timing belt, it uses a chain, tensioner and gears. If it's a Z24 it has no tensioner.How do I change the timing belt and an 87 chevy cavalier?Not something a do-it-yourself person should try...take it to someone who knows what they're doing

How do you know when to change your car timing belt?

I have a Fiat punto 2002 that wont start. everytime i try starting it, it wont start. It sounds like the fan just switches on. I took it to a garage. They have said the timing belt has gone but i dont see how it is because it has not snapped.

The car mileage is only 28k.How do you know when to change your car timing belt?i change my belts on every car i buy...yours is missing teath at the bottom....the crank spinns but the reat of the engine stays still...thats not the worst of it..your head/valves could be damaged....How do you know when to change your car timing belt?You check your owner's manual. Unless something is defective, the belt should be replaced at the manufacturer-specified interval.

Even in the 70s, Fiats had longer timing belt intervals than that. Most modern engines have intervals of at LEAST 60,000 miles, and many are over 100,000.

If your timing belt was out, it would probably do more than %26quot;sound like the fan switches on.%26quot; Depending on what type of engine it has (interference or non-interference) it would either just not work, but should at least turn over, or you'd hear the pistons banging into the valves, pretty much destroying the cylinder head.

Oh, and the timing belt is not a belt that you can see on the outside of the engine. Being so critical to the function and health of the engine, it is encased in its own little cover. Almost every engine that has a timing belt does it like this. You have to actually remove the timing belt cover to see the state of the timing belt. What you're looking at is probably just an alternator, power steering, air conditioning, and possibly fan belt.How do you know when to change your car timing belt?Take it to a different mechanic.

Maybe when they said it has gone they meant its worn down too much? I don't know. Mine snapped on me in my first car. I was driving home from work in the middle of winter and had to sit in my car for an hour till the tow truck came. I was on the highway but on a bridge thing (overpass?), my car just all of a sudden quit. I was lucky I was at the top though becuase I was able to coast down the rest of the overpass and get off on the offramp.

The only thing though is when it went it snapped and wrecked my pistons or something. So the whole engine had to be replaced.

Man 28k, sounds low for a timing belt. Yea, I'd get a second opinion. Good luck!

Edit: To the first answers comment: %26quot;If the engine WON'T turn over when you turn the key, its a battery, starter or ignition switch problem.%26quot; I don't think this is true, because when mine snapped it was like my whole car just died. Nothing worked when trying to turn it over.How do you know when to change your car timing belt?Try taking it to another garage if you dont think its a proper estimate. You would have to take the valve cover off and check the valve train and the crank position to see if everything is lined up properly. but first I would: 1)Check ignition with spark tester inline with plug 2)Check fuel injection system by spraying intake with starter fluid, if it trys to run, something is wrong with fuel injection system.How do you know when to change your car timing belt?The teeth can sheer off the belt, so it isn't snapped but not working.

Its easy to check.

Take the cam belt cover off (plastic cover)

Turn the engine over, the belt should move as the engine turns over. If it doesn't move when the engine moves, its lost some of its teeth,

Big job to fix as the head may need to come off.

Cam belts should be changed at 50k or 80k or 100k+ it depends on the engine and the type of driving.

I bet the 28K is 128K on a 2002

If the engine WON'T turn over when you turn the key, its a battery, starter or ignition switch problem.How do you know when to change your car timing belt?rubber timing belts either wear out by mileage or by age. its only 28k but its almost 7 years old.

Now i dont know why you even mentioned a fan but you must have had it towed to the garage since it would not start. And did you really see the timing belt?? Because it is located behind a metal shroud,,,,it is not the belt that wraps around the various pulleys on the front of the engine.How do you know when to change your car timing belt?The timing belt is usually time, as well as mileage related?And fiat is 5 years or 48,000 milesIf it wont start how did you manage totake it to the garage?The belt may have stripped the teeth and still be in place?Its sounds to me that the problem is the timing belt with the symptoms you are describing?How do you know when to change your car timing belt?You need to remove the timing belt covers and try turning over the engine with the key. If the cam and the crank both turn, then the belt has not gone. If however when you remove the cover you find that the belt has snapped then its already to late!

Ja.How do you know when to change your car timing belt?Look at the belt closely for cracks. Those cracks hinder the grip of the belt which may cause either slipping or loss of torque during starting.How do you know when to change your car timing belt?if you are sure its not snapped, check it has not slipped due to teeth missing. but from what you describe it does not sound like its the belt.How do you know when to change your car timing belt?Buy a Chevrolet.

How hard is it to change a timing belt on a 2003 Hyundai Elantra?

Is this a difficult job? How many hours estimated?How hard is it to change a timing belt on a 2003 Hyundai Elantra?Apparently its not that easy to do. I had the timing belt changed on my 2002 Elantra a couple of months ago and took a professional Hyundai mechanic a couple of hours but he knew what he was doing. Apparently if you let it go and the thing gives out it can cost thousands of dollars because it damages other stuff near it.

If you dont do it right you could be up for a lot of money to get it fixed.

indian baby girl name

ram interrogate

How do i change a timing belt on my vacuum, it's a hoover savvy 2 in 1 bagged and baggless turbopower 7400

vacumm belt broke, have new timing belt(ho-91001028) need to find out how to put new belt into vacumm. took bottom panel off removed old broken belt what else do i do now..How do i change a timing belt on my vacuum, it's a hoover savvy 2 in 1 bagged and baggless turbopower 7400vacuums don't have timing belts

either you are calling it the wrong thing, or you got ripped off by whoever sold you the new one

How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?

Trying to get a guesstimate on how much this service costs.How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?It can take up to 6 hours if they are having problems. Most often however you can have the timing belt off and the new one back on in around 3 1/2 hours.How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?it doesn't matter.... there is a book that tells you how much time it will take, and that's the labor that's charged...How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?Figure $250 -$400 depending on the labor rate!How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?I did not know any %26quot;K%26quot; cars were still on the road.....?How long does it take for a professional to change a timing belt on an 1989 Dodge Aries?should book out around 4 hrs. ithink. i have done just the belt in about 1.5 when that car was newer

How do you change a timing belt on a 2000 Daewoo leganza??

My timing belt broke on my 2000 Daewoo leganza. I need pictures for the timing marks to line up the intake cam and the exhaust cam and the engine crank shaft...........

So how do you find top dead center? How do you change a timing belt on a 2000 Daewoo leganza??first find out if it is an interference motor because u may have dropped a valve onto a piston . i can give u some things to watch 4 1, there should be little round punch marks on the face edge of each gear. those r timing marx. 2. top dead center is found by identifying cyl 1 u may have to pull the plug and put a probe in the spark plug hole then slowly turn over the engine by the driveshaft pulley. dohcs are out of my league. hope i helpedHow do you change a timing belt on a 2000 Daewoo leganza??if you've never changed a timing belt i dont think it's best to try it your self first. it's a pretty daunting task.

How much should I pay to change timing belt in my 2000 Volvo V70 AWD?

You could pay anywhere between $500-$1000 for the job depending where you take it.

You should pay what you are charged to get it done right.How much should I pay to change timing belt in my 2000 Volvo V70 AWD?Be a man and do it yourself.

God didn't give you that much space under the hood so you could be a pretty boy and keep your hands clean while real men turned wrenches on your car.

Now, you didn't say which engine it was but it's probably the I5 since you mentioned AWD. There's a LOT of space under there, it should be a pretty easy job. You will need a new tensioner along with the belt, and it's a good time to do the water pump too since you'll be rolling around in that general area. You also may want to invest in a cam lock tool.

Since timing is important, loosen all the spark plugs so the engine won't roll when you pull the belt. Before pulling the belt, make a mark on the block which you can match to a mark on the pulley for the crank so you can do the matchmark timing game.

BE A MAN, USE YOUR HANDS.

When do you have to change the timing belt on a 1988 honda accord Lx?

it's got 130k miles now but i don't know if it was changed before or not.

thanks!When do you have to change the timing belt on a 1988 honda accord Lx?130k thats a few miles -- im a firm believer in if it works dont mess with it but if you can get a visual of the belt to see if it is cracked or damaged in any way that would let you know if it needs replacedWhen do you have to change the timing belt on a 1988 honda accord Lx?THEY ARE TO BE CHANGED EVERY 35 TO 45 AND SOME WILL NEED TO BE CHANGED OVER EVERY 65 THOUSAND MILES DEPENDING ON THE FACTORY SPECKS BEST THING TO DO IS CALL THE DEALER NEAREST YOU AND ASK THEM AFTER ALL THEY ARE THE ONES WHO WOULD KNOW WHEN IT IS REALLY TIME TO CHANGE THE TIMMING BELT AND HOW MUCH MILAGE YOU CAN GO BEFORE YOU HAVE TO CHANGE THE BELT HOPE THIS HELPS GOD BLESS AND HAVE A GREAT DAY ......................When do you have to change the timing belt on a 1988 honda accord Lx?If you have your owners manual for your 88 Honda it should indicate in there when to change the timing belt along with any other maintenance issue. As far as changing your belt, that all depends on how good of shape your car is currently in. Also to include on how much longer do you want to keep it running. If I were you I would go ahead and change it. It's a 50/50 chance but you don't want to take that risk when indeed that timing belt breaks on you. If it does break your looking at a %26quot;4 figure dollar%26quot; amount fix. Not only will your timing belt be broke but others will be impacted as well like valves, they'll be bent. At that point you've might as well get a new engine or even a new car! Best of Luck

How to make a babys quilt

asp hosting

How hard is it to change a timing belt?

Everyone says its impossible or expensive. What can go wrong?How hard is it to change a timing belt?PUTTING IN SIMPLE TERMS, IF YOU HAVE NEVER DONE THIS %26quot;THEN DON'T DO IT%26quot;.

MISALIGNED TIMING BELT = BENT VALVES AND OR MOTOR REPLACEMENT.

EVERYONE IS WRONG IN WHAT THEY ARE TELLING YOU.How hard is it to change a timing belt?I would definitely get a second opinion on that. I have heard that it is not that bad myself. I wish I could help you with details. You should post the make and model ...that might help.How hard is it to change a timing belt?if you dont do it right you can bend the valvesHow hard is it to change a timing belt?It's not easy, and if you don't get it exactly right the pistons tend to become one with the valves.How hard is it to change a timing belt?If you're gonna do it yourself, yes, things can go wrong if you're not familiar with how it all works. A timing belt is like a timing chain on an older car. Yours is probably over head cam(s). Some of the belts, OHC, are 'external' with only a 'cover' for safety's sake. Some are inside the engine housing, like a Mazda Miata. The external ones are easy, basically, but you gotta know about the 'timing' itself on either external or internal. If I were you %26amp; didn't have a garage w/helper, I'd take it to a good mechanic.How hard is it to change a timing belt?most of the time nothing will go wrong if when you take it off . but always mark the gears so when you put on the new one the gears will be in line. because if there not then the time will be off. and biggest part of the time if that happens you have to take it back apart and reset the gears again.How hard is it to change a timing belt?Its really not hard to change it but getting it timed afterwards is the problem... In the long run its better to take it to an everyday mechanic.. (Not your dealer) Good luck Grant M in Pennsylvania

How long does it take an experienced mechanic to change a timing belt cover(not belt) on a Mitsubishi truck?

This is on a 1991 Mighty Max truck with the 3.0 engine,A/C and 4x4?How long does it take an experienced mechanic to change a timing belt cover(not belt) on a Mitsubishi truck?a day if not too busy

evedently you dont have to do the six brake jobs that left 3 customers waiting the 20 oil cahnges . order parts do estaments talk to customers so no sounds like you are just an installer job call for 3.2 hours if that was all i had to do i can do it in 1.5 but seeing how thats not my only job i would rather give her a realist time of one day. hom many times have you ardered a part and had scotty from the uss enterprise zap it to you ?How long does it take an experienced mechanic to change a timing belt cover(not belt) on a Mitsubishi truck?it would take me around 3 hours to do and im just trying to be a mechanic , haha a day :() too many sandwhich breaks !

How long does it take for a shop to change a timing belt?

It's for a '97 VW Jetta.

It's been in a shop for weeks, and every time I call, they just say %26quot;tomorrow.%26quot;How long does it take for a shop to change a timing belt?a couple of hours. something sounds fishy about this. either they really messed something up or someone just does not know what they are doingHow long does it take for a shop to change a timing belt?2 hoursHow long does it take for a shop to change a timing belt?They're giving you garbage. Find another more reliable place. A timing belt should not take more than a day or so to replace. Especially if the shop is certified.How long does it take for a shop to change a timing belt?They should not have the car more than 1 day.How long does it take for a shop to change a timing belt?Scrap the car. It isn't worth it. It takes about 5 hours book time.

Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?

what mileage do they recommend replacing the timing belt?Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?Almost all modern engines are interference design (with the exception of Mazda and Saturn - that uses chain drives).

The belt life is 60k miles. Some companies (like VW and Audi) recommended 100K mile then lowered it to 90 K mile. But even so most informed VW and Audi owners are going with 60K miles.

Good Luck...Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?for odysseys honda s/m (service manual) recommends t-belt replacement at 7 years or 105,000 miles whichever comes first. honda engines are generally interference engines,in my 12 years at honda i have yet to see a honda that did NOT need a valve job after the t-belt broke.

Report Abuse

Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?yes maby 100000Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?YES!! IT DOES!! AND IT BEND VALVES IF THE TIMING BELT BRAKE. Will bend valves. 06 Should be at 90000. I would call the dealer. They can give you the up-to-date calling or the timing belt.Does the Honda Odyssey '06 EX-L have an interference engine? What is the rec mileage change for timing belt?the best time to replace timing belt is between 50 and 60 thousand miles

Mechanic question: how to change a timing belt and tensioner on a 97 subaru 2.5 VJ engine?

I'd really appreciate it if someone who knows these engines well could explain step by step how to change the timing belt and tensioner on this engine.

Is there anything that can be done wrong that would cause the tensioner bolt to break?

This is so I can know if the job was done correctly in my car where the tensioner bolt broke 2 1/2 months after a new timing belt and tensioner was installed.

Thanks so much.Mechanic question: how to change a timing belt and tensioner on a 97 subaru 2.5 VJ engine?If the shop offers any kind of warranty at all - and they should - then the fact that a part they replaced 10 weeks ago broke would be something I would expect to be covered.

The bolt could have been over torqued, or they could have re-used the old bolt instead of the new one supplied with the tensioner - stupid, but it can happen.Mechanic question: how to change a timing belt and tensioner on a 97 subaru 2.5 VJ engine?haynes or chilton manual at parts store.you'll need to go there for the belt anyway. these manuals are step by step they even tell you the tools youneed

Marine Fish

When do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?

I thought it was time, but a source told me that it mattered why type of engine you have. I have the original engine for the car, but do not know what it means.When do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?Replacing the timing belt isn't an overly expensive repair.

You should replace it every 60,000 miles regardless of how you drive.

If you ever have one of these belts break and see what damage they can do to the engine the $100 cost of replacing the belt will seem cheap!When do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?i'd worry about it when you hit about 100k miles, depending on your driving habits. if you racing everywhere you go, i might follow the factory suggested 60k milesWhen do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?before it breaks....

otherwise you will have a lot of problemsWhen do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?60,000 miles is the average lifespan but my motto is if it ain't broke don't fix it, some go 100,000 miles. If you remove the cover and inspect it for cracks in it like the cracks that form on serpintine belts, or pieces/teeth missing go ahead and replace it, you can expect to pay several hundred dollars to have it done though! If it runs fine leave it alone.When do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?change it at 60000 miles. better safe than sorry. It will be way way more expensive if it breaks while you are driving it.

NojWhen do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?Gates (link below) says to replace your timing belt at 105,000 miles, especially since your have an %26quot;interference%26quot; type engine that can suffer major damage if the belt breaks. You also have a timing belt driven water pump, so I would replace the water pump at the same time, and maybe the belt tensioner if recommended by your shop.When do I need to change my timing belt on my 01 Dodge Neon? Is there a difference between types of engine?Definitely do it between 60k - 70k or you will more than likely be sorry. Gold certified dodge technician for 13 years

How much should it cost to change a timing belt, a timing belt tensioner and a crankshaft position sensor?

The car is a 2000 Hyundai Sonata V6 and I'm guessing like a $400 range.How much should it cost to change a timing belt, a timing belt tensioner and a crankshaft position sensor?OK:

Timing Belt Tensioner: 70 Bucks

http://shop.advanceautoparts.com/webapp/

Timing Belt: 76 Bucks

http://shop.advanceautoparts.com/webapp/

Cranshaft Position Sensor: 51 Bucks

http://shop.advanceautoparts.com/webapp/

However, depending on your mileage, you should get a timing belt component kit, just so you dont have to worry about old residue and crap on the pulleys, and they do wear out, and if one of them breaks, you just detroyed your motor.

Timing Belt Kit: 43 Bucks

http://shop.advanceautoparts.com/webapp/

Now, if you do the work yourself, find a good hyanduai forum where you can learn how to properly time that engine, as it isn;t easy, and will run about 300 for the labor to have it done for you.How much should it cost to change a timing belt, a timing belt tensioner and a crankshaft position sensor?Using RepairPal on my iPhone, a timing belt replacement (in Cleveland, Ohio, anyway) should cost between $365.00 and $458.00 ($86.00 to $102.00 for parts, $279.00 to $356.00 for labor).

I hav 2003 Elantra (57000 miles). Can I drive 10-15000 miles more before I change the timing belt or do it now

I have 2003 Hyundai Elantra (57000 miles). Can I drive 10-15000 miles more before I change the timing belt or I have to do it at 60000 miles as mentioned in manual.I hav 2003 Elantra (57000 miles). Can I drive 10-15000 miles more before I change the timing belt or do it nowtiming belt should be done either every 60 k or every seven years which ever comes firstI hav 2003 Elantra (57000 miles). Can I drive 10-15000 miles more before I change the timing belt or do it nowYou shouldn't have to change the timing belt until 115,000 miles, at least that is how it is with Subaru...might be lower for Hyundai but i doubt that it would be as low as 57,000, if you have to change it that early than that is just sad.

How do you change a timing belt for a 1997 Honda Civic DX?

If there are resources or manuals you know of to do this, that would be extremely helpful.How do you change a timing belt for a 1997 Honda Civic DX?A Haynes manual is about $18 from yer nearest parts store.How do you change a timing belt for a 1997 Honda Civic DX?Honestly, the procedure is NOT somthing a shade-tree mechanic should try. Check you local yellow pages for any auto repair or vo-tech schools in the area. The one here only charges for the parts if you don't supply them. NO LABOR!!How do you change a timing belt for a 1997 Honda Civic DX?chiltons can buy or go to library

How hard is it to change the timing belt on a 93 Saturn?

I have pretty basic automotive skills and a few tools. Is there anything special that i should know? Do i need any special tools that the average backyard mechanic might not have?How hard is it to change the timing belt on a 93 Saturn?first purchase a shop manual for this car as there several procedures that Saturn uses that are different from most everyone else. sl/sc engines do not have timing belts they are chain driven[granted it is not much more than a bicycle chain] but if it breaks the cyl. head will have to come off for valve replacement and guide repairs both twin cam and single cam engines are interference fit [valves collide with pistons] if the timing cover is to be removed it is sealed with R.T.V.sealant and surfaces must be chemically clean upon reassembly to prevent oil leakage. there is a tool available to align the geroter type oil pump and should be obtained as this part of the job with engine in the car can be tricky. #[SA9104E] if chain is to be replaced you must also install new tensioner and guide rails as they will be worn out or broken up. NOTE rebuilt sl engines [single cam] are rather inexpensive from Saturn if your body and interior are still in good shape you may be money ahead to replace the engine especially if you know that valves are bent. this is an awkward engine to remove[sub-frame comes out with engine and trans] and should only be done on a lift. hope i helped and use caution jacking and blocking,[ you can only be dead once.] and good luck

cute hair

shampoo good for hair

Price on Timing belt change on 96 toyota corolla?

car has 150k on it now, trying to see if its worth fixing.Price on Timing belt change on 96 toyota corolla?Timing belt should be replaced every 60k miles. I assume it has been replaced at 120K, your next time to change is at 180K miles. It would be wise to have someone check it for you to see if there are missing teeth or cracks. Cost to replace just the timing belt it shouldn't be more than $200 for labor. Good luck.Price on Timing belt change on 96 toyota corolla?$200 for just the belt but I would recommend that you do a full timing belt service. it can run around $500-550, but it will include changing your cam and crankcase seals, timing belt, accessory belts and water pump. Usually I'd say go the cheaper route but in this instance, it's actually cheaper to doit all at once than replace those items later.Price on Timing belt change on 96 toyota corolla?when you say that the car has 150k are you talking klms or miles depending where you are located in aust at 150klms it is time to change the timing belt if you intend to replace the belt and keep the car go to your local toyota dealer and obtain a quote as they will use genuine parts i.e the timing belt genuine has a life of 150 thousand klms after market are cheaper but they only have 40 klms or 12 months warranty so in the long run if you intend to keep the corolla they use genuine but if you are thinking of selling soon they you could use non genuine parts as fitted by most mech shop's but to be honest you will find that there is not a huge diff in price as most toyota dealers has special.s on timing belt replacements i.e the total cost inc labour is around $450.00 to $500.00 dollars inc all parts i.e belt seals water pump and new fan belt'Price on Timing belt change on 96 toyota corolla?Depends where you live and who replaces it, Toyota dealers will charge more...should be in the 300-500 range tho'.

How often do i need to change the timing belt and serpentine belt on a 2004 Chrysler Pacifica?

It currently has 43000 miles and I bought it used in May of this year.How often do i need to change the timing belt and serpentine belt on a 2004 Chrysler Pacifica?dealer recommendations are 50,000 for both belts serpentine you can get away with timing belt you always want to do before it breaks (around fifty thousand miles or so ) because if it brakes you are looking at bent valves and head problems which would be alot more expensive than changing the belt as a preventative maintenance itemHow often do i need to change the timing belt and serpentine belt on a 2004 Chrysler Pacifica?The serpentine belt runs power steering air conditioner compressor water pump and probably some thing els I'm forgeting. It should be inspected every time you change the oil. If it looks cracked it should be replaced. With 43000 miles I would replace the belt. The timing belt is another story. It should last a very long time. At least 100,000 miles. If you are not a mechanic I don't recomend doing this your self. But most manufactuers do not recomend a timing belt change untill after 100,000 miles.

How long does it take to change the timing belt on a 2 door 2002 Honda Civic?

My husband is going to attempt this on Saturday with the supervision of a mechanic, but my husband is novice himself. He is confident he can do it, I am just curious about the time investment since we have a wedding that day also. How long does it take to change the timing belt on a 2 door 2002 Honda Civic?the last one that i did with the water pump took 4 hours with the owner talking to me at the same time. but i have been doing this fro 25 years. on my car it took 6 hours because i had to wait for a part that broke, the harmonic balancer cracked when i pulled it off, i also did a water pump and a timing belt at the same time though. along with a coolant flush...How long does it take to change the timing belt on a 2 door 2002 Honda Civic?It took me more than 14 hours. And I'm an experienced mechanic.How long does it take to change the timing belt on a 2 door 2002 Honda Civic?They are not that bad if you are an experienced mechanic, The labor time on them is right around 4 hours....which is the time it should take an experienced mechanic to complete. I would say for a novice it might take a full saturday. Good Luck!How long does it take to change the timing belt on a 2 door 2002 Honda Civic?if you've doen it before prolly like 1 hour, along with the water pump. i can do it in 45 if i'm jamming. but in the back yard it would take me about 2 hours with out air tools. make sure you get the tool to break the crank bolt. if not you are gonna be there forever trying to get the crank bolt off. the eng rotates opposite so you cant break it with the starter. give about 4 hours with out beer. add 2 hours for the football game and beer breaks.How long does it take to change the timing belt on a 2 door 2002 Honda Civic?2.5hrs if u have a car lift..

I'm trying to remove the crank pulley bolt so I can change my timing belt.?

I have a 1997 VW Jetta 2 liter and want to change the timing belt. I can not remove the crank pulley bolt even with a 1/2%26quot; impact. Am I turning it the wrong way? Is it clockwise or counter clockwise? The bolt head is a 19 mm 12 point. Any tips on how to remove it would be appreciated. I'm posting this for my hubby.I'm trying to remove the crank pulley bolt so I can change my timing belt.?Anti clockwise to undo. Jam a power bar and socket on to the chassis and operate the starter.

These are notoriously tight and hard to undoI'm trying to remove the crank pulley bolt so I can change my timing belt.?If you have a manual transmission, put it in gear, set the parking brake, and use a breaker bar to turn it counter-clockwise as you look at the head of the bolt. If it's an automatic, remove the starter and use a prybar or something similar to lock against the teeth on the flywheel so the crank won't spin... again, turn it counter-clockwise.

Also, spray it with penetrating oil first and let it sit for a while. If you happen to have rust on the threads or the bolt and it snaps in the crank, it's a real pain to fix.I'm trying to remove the crank pulley bolt so I can change my timing belt.?the threading of the bolt usually depends on the rotation of the motor. I believe if the motor turns clockwise, the bolt loosens counterclockwise, and Viceversa...

i'm not saying to do this...but i used to break them loose on older cars by finding the rotation of the motor, wedging a breaker bar under the control arm accordingly and cranking the motor without the coil plugged in. (with everyone away from that side of the car too!!!)I'm trying to remove the crank pulley bolt so I can change my timing belt.?If the pulley spins clockwise normally it probably will have counter clockwise threads, this prevents it from spinning out while running. It would be advised to find a shop manual and confirm this.

How long does it take to change a timing belt on an Oldsmobile Cutlass?

I don't know how many miles or the exact year. I think it's early to mid 1990's. It's my boyfriend's car and he's thinking of changing it on its own. I just want to know how long that might take.How long does it take to change a timing belt on an Oldsmobile Cutlass?I own a shop, and build many engines. A good experienced mechanic will take about six - eight hours. Some engines have belts, while others have chains, it just depends on which engine you are talking about. I know I may get some flack about how long it takes, and what the book calls for, but If a person does one, then one must consider the tool thing. How is he going to remove the damper from the crankshaft? Sometimes they will break, even using the correct gear puller on them. Some have a tensioner that must be replaced in them, so this job can turn into a nightmare for a backyard mechanic sometimes. Tell your BF to go purchase a %26quot;Haynes Repair Manual%26quot; from the parts store %26quot;before%26quot; he tries to tackle the job, or he may end up with a blown engine on his hands.

Part 2:

Many people on here over look the fact; the answers thing is world wide, and they are assuming you are in the USA. Like I said it depends on the engine as to the chain, or belt thing. The chains use a different type of tensioner. It has what is known as a wear strip on the tensioner, and if this is worn it will have to be replaced. It's not worth getting in a fight with your BF over %26quot;its a belt, or its a chain%26quot;! If it's his car, then let him work on it, and don't worry about %26quot;how long%26quot; it will take to do the job because; once he gets started on it, he will see it's a job he doesn't need to do, and that will be the end of that. Sounds like he wants to be a mechanic, and what better way for him to get started? Giving your BF some space may do more for your relationship than he will for the car. I think once he see's what he is getting in to, he will forget about changing it. One can love a puppy, but hold it too hard, and squeeze it to death.

Glad to help out, Good Luck!!!How long does it take to change a timing belt on an Oldsmobile Cutlass?as long as the mechanic feels it takes.How long does it take to change a timing belt on an Oldsmobile Cutlass?How experienced is your boy friend with mechanics? It is a six hour job if you know what you are doing. First thing to do before he starts tearing into the car is to find true top center on the number one cylinder. That is the compression stroke of the cylinder. Once that is established you will be able to remove the radiator and the water pump and hoses. Remove the valve cover where the number 1 cylinder is and watch the valve spring open and close on the number 1 cylinder. Make certain that it is the intake valve not the exhaust valve. Remove the timing cover and look at the posistion of the dot on the large gear. That is the gear on the top. Double check that it is on the compression stroke of the number 1 cylinder.

Line up the two dots on the new timing chain in the middle facing each other on the gears. Rotate the engine by hand until the dot on the large gear is at the very top in alignment with the lower gear. That is actual top dead center on the number 1 cylinder. Double check your work. Rotate the engine once again and watch the intake valve open then close. The dot on the large gear should be in alignment in the middle with the dots facing each other. After that rotate the engine until the dot is at the exact top in alignment with the lower dot. Replace the timing cover and accessories. Good luck little Lady.................How long does it take to change a timing belt on an Oldsmobile Cutlass?well first place its chain change only if broke or worn time well everything on front of motor has to come off 3.5 to 5.5 for someone experienced and the right toolsHow long does it take to change a timing belt on an Oldsmobile Cutlass?There is no timing belt on these cars, only a timing chain. Why change it?

This isn't really a job that I would tackle in my driveway. It would take 4 or 5 hours if you are familiar with changing timing chains. On this particular engine, the oil filter adapter housing/pressure regulator is bolted to the side of the front cover in front of the R/S inner tripod joint. You must remove the R/S axle to access it.

Good LuckHow long does it take to change a timing belt on an Oldsmobile Cutlass?as long as it takes like an afternoonHow long does it take to change a timing belt on an Oldsmobile Cutlass?this car definitely has a timing chain but they can still stretch and the plastic rollers on them can crack and break. this is not a job for even a slightly experienced gear head. let a professional do it because if you mess it up, youre out a car. but if a shop messes it up, you get compensated.... let's be smart hereHow long does it take to change a timing belt on an Oldsmobile Cutlass?if you dont know what you are doing it could take a verry long time.. if you do know what your are doing. shouldnet take more than a couple of hours.... but you got to make sure you get the timing right.. and that is verry easy to screw up.. if the timing wheel gets turned at all.. and you put the belt back on it can be in the wrong positon and the car wont start .. the valves halve to be in the right position.. and a certin valve hals te be the one that is up .. and they go around twic there is two positions where that valve will be up if i remember correctly.. been a long time sine i worked on timing...

find wildlife envelope seals

any advice appreciated

Should i change my timing belt on my 1998 audi a6 2.8 quattro?

i bought a 1998 audi a6 quattro few months ago and i don't know if the timing belt was changed or not? how can i tell? my car now has 104,000 miles on it but when i bought it it had like 94k.i know this is a very important belt to fix otherwise the engine will be screwed!Should i change my timing belt on my 1998 audi a6 2.8 quattro?YES... unless you are feeling VERY, VERY lucky!!! I have a 99 A6 2.8Q and I am having my TB done this week... it has 59k miles on it.

I also have a VW with 60k miles and the TB has just been done. It has been my experience with VWs and Audis that its best to have the TB done sooner rather than later!! Ive seem what comes after a belt breaks... and the repair costs!!! For me --- its just not worth the gamble...Should i change my timing belt on my 1998 audi a6 2.8 quattro?Take it to a shop and have them look. They can see if its new or not. DO not take any chances if that belt breaks it cost thousands to fix.

What do you have to get changed when changing timing belt?

I got 2001 Honda Accord LX V6. Some mechanic was honest enough to tell me that it my V6 does not have drive belt, so I'll know other mechanic who tells me that I have to get drive belt changed with timing belt changed is trying to rip me off.

However, what else do you need to get changed with timing belt? Is water pump a must?What do you have to get changed when changing timing belt?No drive belt. However, it is recommended that you change the waterpump and thermostat while in the front of the engine.What do you have to get changed when changing timing belt?That's an honest mechanic, keep them around. You don't have a timing belt, you have a timing chain. Although they last longer than a belt, it can still break from normal wear. Check out your manual for replacement time.

Water pump on a timing belt change is not neccessary, but most mechanics throw in the labor for changing for free since they are in that area of the engine for the timing belt. The serpentine belt should also be changed at the same time. The cost for those parts is minimal, so it's a good deal. Depending on the car, they may also change out the timing belt tensioner.

VOLKSWAGEN POLO 1.4 CL R REG TIMING BELT CHANGE?

just bought a R reg polo with 63000 miles on the clock and need to know if i need to change the timing belt. looks in good condition, but want to be sure. thanksVOLKSWAGEN POLO 1.4 CL R REG TIMING BELT CHANGE?As your car is 13 years old get the belt changed as soon as possible. Opinion points towards cam belt changes between 60 and 80,000 miles but belts also deteriorate over time.

When should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?

My 2002 Ford Ranger, 2.3L 4-cylinder engine, has about 75,000 miles on it now. I can't find anything in the manual or Ford's recommended service schedule about the timing belt. I understand that some vehicles risk serious engine damage if a timing belt breaks, while others just shut down without serious damage. How can I tell which category my truck fits into?When should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?I believe your 2.3 is a non-interference engine so if it breaks it simply quits.

The rule of thumb for timing belts is 100k = change the belt unless the owners manual specifically requires more frequent replacement.When should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?most car manuals recommend about 75,000. if in doubt, get it done. best way to think of it is- the cost of changing it now compared to the cost of changing it after it goes

its hard to say how much damage would be done but itll definitely cost a lot more than replacing it nowWhen should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?it would be a good time to change it now because if it breaks it can bend the valves.When should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?i believe the cars that have the engine issue are the Japanese models.

they suggest you change the belts at 60,000 miles to be safe.

they can be expensive to change so don't be surprised if the cost is in the hundreds of dollars. i've heard it cost about $600.00 to replace them on the foreign cars. i would surely change it soon.

shop around but i'm not sure i would go to a DEALER. they are always the most expensive. they may or may not be worth the difference.

good luck to ya.When should I change the timing belt on my 2002 Ranger (and what happens if it breaks)?The engine will just stop running with no damage from a broken belt.

How hard is it to change the timing belt / chain on a 2001 Taurus?

Is it a belt or chain ?How hard is it to change the timing belt / chain on a 2001 Taurus?Should be a chain depending on the motor is how hard its going to be. If it is a 3.0 ohv valve motor its not to bad. The duratech 24valve is more complicated. You would need a days worth of time to complete the job. You need to remove the water pump and crankshaft pulley and then the timing cover.How hard is it to change the timing belt / chain on a 2001 Taurus?both are chainHow hard is it to change the timing belt / chain on a 2001 Taurus?its a v6 right?

i most cases they take the whole engine out because there just no space to work in the engine bay so its hard to change it

i think is a chain.How hard is it to change the timing belt / chain on a 2001 Taurus?Don't touch it if it's a chain. Also...if you have limited knowledge and tools this spells timing doom.

copier request for information

extension to sqltableprovider

Tuesday, October 25, 2011

Blog Archive

About Me